Duro Dyne’s Self Stick Square Framed Access Doors offer a considerable savings in job site installation vs the traditional dovetail tabbed style. Using the Self Stick Doors, the field sizes and cuts a hole in the duct wall, peels release paper to expose the wide airtite self stick framing the circumference, presses the door into position and inserts one screw into each of the four corner pre-drilled holes. Because there’s such a wide flange of self stick, the hole can be cut a little off and still not create an issue.
Tabbed doors have been the standard for many years but they are labor intensive to install because the hole must be sized and cut exact, then the tabs manually pushed in and folded back …one by one. Then, contractors feel obliged to brush on duct sealant knowing from experience that the tabs are often not pressed against the neoprene gasket securely and thus there will be air leakage from the door at the corners.
The design of the self stick doors is such that the Door itself is comprised of two identical 24 ga half doors frames insulated with 1″ fiberglass and clinched into one piece.
6″ x 6″ thru 24″ x 24″, Tested to 10″ WG, this is an Access Door that will likely soon be in most Engineer specifications.
NHSAD – Self Stick Insulated Access Doors Hinged
DDNHSAD1812 18×12 Self Stick Access Door Hinged 7052
DDYHSAD0606 6×6 Self-Stick Insulated AD Hinged #7310
DDYHSAD0808 8×8 Self-Stick Insulated AD Hinged #7311
DDYHSAD1010 10×10 Self-Stick Ins AD Hinged #7312
DDYHSAD1212 12×12 Self-Stick Ins AD Hinged #7313
DDYHSAD1414 14×14 Self-Stick Ins AD HInged #7314
DDYHSAD1616 16×16 Self-Stick Ins AD Hinged #7315
DDYHSAD1818 18×18 Self-Stick Ins AD Hinged #7317
DDYHSAD2020 20×20 Self-Stick Ins AD Hinged #7318
DDYHSAD2424 24×24 Self-Stick Ins AD Hinged #7319
7046 NHSAD6x6 6×6
7047 NHSAD8x8 8×8
7048 NHSAD10x10 10×10
7049 NHSAD12x12 12×12
7050 NHSAD14x14 14×14
7051 NHSAD16x16 16×16
7052 NHSAD18x12 18×12
7053 NHSAD18x18 18×18
7054 NHSAD20x20 20×20
7055 NHSAD24x24 24×24
