Spec Sheet
Operating Instructions
Item Code: RUEN
Available with Slot Notch or V Notch pattern. Conklin stocks Slot notch as standard.
Pricing:
RUEN Ruoff Complete Notcher (#1 V or #3 Slot P&D) Standard $2,986.35 USD
RUEN-NMFW Ruoff Complete Notcher (#1 V or #3 Slot P&D) with Non-Marring Feed Wheel $3,187.44 USD
Still made in the USA, this little machine has been around unchanged for many decades. It’s power driven, feeds automatically, and notches the full depth of the metal edge as a V or Slot pattern with a capacity of notching 16 ga Galvanized and 20 ga Stainless. Depth of V is 7/8″ but machine comes with 1/8″ spacers which allows shop to notch shorter depths – 3/4″, 5/8″ , 1/2″ and 1/4″. The Slot Notch, because it’s thinner, has a max depth of 3/4″ and also comes with the 1/8″ spacers. Machine available in two models—as a standard model and as Non Marring Feed Wheel model. The former is the most common to air conditioning contractors, the latter to sign companies. The difference in the two models is the encapsulated rubber cord on the special feed wheel which allows the notched material to remain smooth, unmarred, and without serrated impressions. For HVAC Duct Shops the standard model machine is used in tandem with a 7 station rollformer that runs the 3 in 1 profile – specifically the 5/8″ Outside Tap (aka Hammerlock or T Connection). The Rollformer always rollforms the profile prior to running the notches in a Ruoff Notcher as the Notcher only operates on metal in the flat.
Variable Depths from 1/8″ to 7/8″
Variable Spacing of 5/8″ to 1 1/8″
Dimensions: 18″w X 12″d X 50″h
Weight: 120 Ibs.
Speed: From 20 feet per minute (240 punches per minute) up
Centers of notches are adjustable up to 1 1/8″ max.
Depth of notch is adjustable up to 7/8″ max.
