Ductformer TD Duct Brake
Brand Ductformer Dimensions 80" L x 30" W x 50" H Length 80 in Phase 1PH Width 30 in Capacity 16 Ga Height 50 in Manufacturer Ductformer Voltage 110V The American made TDFC Power Brake is designed specifically for bending the 90° bends on rectangular duct work. It is an extremely efficient tool to use for bending straight duct joints and fittings for Full Wrapper or L-Shape Duct with TDFC style (F-Style & C-Style) flange connectors. One (1) Operator can quickly and easily slide a part into the machine and align the notches in an instant on the alignment blade located on the bending line.
A unique safety feature, the TDFC Power Brake can minimize serious injury because full clamping forces are not applied until the clamp is less then finger thickness distance from the metal to be formed. Full clamping forces are only applied when the clamp is less the ¼” from contacting the work metal.
- Forms TDFC Duct & Fittings
- Forms 16 Ga. Duct up to 5’ in Length
- Eliminates Segment & Set-Up Change Overs
- Forms TDFC Fittings in Half the Time
- Infinitely Variable
- Forms Two Piece & Full Wrapper Duct
- Built-In Notch Guide for One Man Operation
- Heavy Duty All Steel Construction
- Quiet Smooth Pneumatic Forming Cycle
Air Requirements: 5 cfm @ 80 PSI
$24,500.00
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Ductformer Dimensions 80" L x 30" W x 50" H Length 80 in Phase 1PH Width 30 in Capacity 16 Ga Height 50 in Manufacturer Ductformer Voltage 110V The American made TDFC Power Brake is designed specifically for bending the 90° bends on rectangular duct work. It is an extremely efficient tool to use for bending straight duct joints and fittings for Full Wrapper or L-Shape Duct with TDFC style (F-Style & C-Style) flange connectors. One (1) Operator can quickly and easily slide a part into the machine and align the notches in an instant on the alignment blade located on the bending line.
A unique safety feature, the TDFC Power Brake can minimize serious injury because full clamping forces are not applied until the clamp is less then finger thickness distance from the metal to be formed. Full clamping forces are only applied when the clamp is less the ¼” from contacting the work metal.
- Forms TDFC Duct & Fittings
- Forms 16 Ga. Duct up to 5’ in Length
- Eliminates Segment & Set-Up Change Overs
- Forms TDFC Fittings in Half the Time
- Infinitely Variable
- Forms Two Piece & Full Wrapper Duct
- Built-In Notch Guide for One Man Operation
- Heavy Duty All Steel Construction
- Quiet Smooth Pneumatic Forming Cycle
Air Requirements: 5 cfm @ 80 PSI