Duro Dyne 156 Regulator Sets
Brand Duro Dyne® Country USA Includes (1) RB-50 Rapit Spring Bearing, (1) RP-3 Washer, (1) RP-1 Handle and (1) RP-2 Wing Nut Alternate Part Number RS156 Country of Origin US Manufacturer Duro Dyne The Rapit is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.
- Slip the bearing over the edge of the damper at the bearing line
- Lay the assembly on any firm surface and rap the prong with a hammer
- One blow drives the prong through the damper blade, holding it securely to the damper
- When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the Rapit bearing
The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit® will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.
- Slip the bearing over the edge of the damper at the bearing line
- Lay the assembly on any firm surface and rap the prong with a hammer
- One blow drives the prong through the damper blade, holding it securely to the damper
- When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the Rapit® bearing
$4.48
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Duro Dyne® Country USA Includes (1) RB-50 Rapit Spring Bearing, (1) RP-3 Washer, (1) RP-1 Handle and (1) RP-2 Wing Nut Alternate Part Number RS156 Country of Origin US Manufacturer Duro Dyne The Rapit is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.
- Slip the bearing over the edge of the damper at the bearing line
- Lay the assembly on any firm surface and rap the prong with a hammer
- One blow drives the prong through the damper blade, holding it securely to the damper
- When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the Rapit bearing
The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit® will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.
- Slip the bearing over the edge of the damper at the bearing line
- Lay the assembly on any firm surface and rap the prong with a hammer
- One blow drives the prong through the damper blade, holding it securely to the damper
- When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the Rapit® bearing