Empire Rotary Machine with 3/8" Single Bead Rolls, with Fwd/Rev foot pedal - 110V/1Ph
Empire Rotary Machine with 3/8" Single Bead Rolls, with Fwd/Rev foot pedal - 110V/1Ph
Brand Empire Machinery Phase 1PH Voltage 110V Manufacturer Empire Machinery Type Electric We offer three models of this Power Rotary machine: the Hand Crank, Air Cylinder and Hydraulic Cylinder. It’s worth noting that all three models include the Hand Crank. This base model is easily the top seller followed by the Air Cylinder Model which speeds up beading (or crimping) operations on spiral fittings. The Hydraulic Cylinder model is recommended for shops using exclusively for Vanstone flanges.
While the flanging rolls require a controlled step down of the upper shaft which only the Hand Crank or the Hydraulic Cylinder machines can offer, a simple solution for shops that like the speed afforded by the air cylinder but want to do some flanging is to take the cylinder off when needed. It takes about two minutes to get the cylinder off and put the hand crank on.
All machines come with a foot pedal, but the manual machines (#36001) you can choose to have either the variable speed or forward/reverse pedal. The standard foot pedal still has speed control on the dial, the variable changes speed based on how far the pedal is pushed down.
EMT-7R (Base Machine) #36001 110 volt Single Phase [VIDEO]
Retrofit Options for existing machines (pick one) Note each of the Listed Options is an addition to the base machine itself. Manual hand crank is standard with all models:
#1: Air Cylinder with Variable Speed Forward/Reverse Foot Pedal (ideal for shops that make Spiral Pipe fittings): Part #39003
#2: Hydraulic Cylinder with Forward/Reverse Foot Pedal And Hand held Pendant (ideal for forming Vanstone Flanges): Part #39005 when bought as retrofit from air cylinder Part #39005-NP when bought as retrofit from manual
Roll Options:
#37000 3/8” Single Bead Rolls (note : Included with the purchase of a new EMT-7R) - set
#37003 1/2” Single Bead Rolls - set
#37005 1/4” Ogee Bead Rolls ( this is a Double Bead, one up and own down) - set [VIDEO]
#37007 Crimping Rolls Heavy Gauge (16GA/18GA) (1-3/4″ Wide Crimp) - set [VIDEO]
#37008 Crimping Rolls Light Gauge (20GA & Lighter) (1-3/4″ Wide Crimp) - set [VIDEO]
#37009 1/4″ 90 Degree Flanging Rolls (Pipe Stays in Horizontal Position) - set
#37010 1/2″ 90 Degree Flanging Rolls (Max. Capacity 16 GA Stainless), (Pipe Stays in Horizontal Position) - set [VIDEO]
#37011 1/2″ Offset Rolls - set [VIDEO]
#37013 Flattening Rolls (Smooth Face) - set [VIDEO]
#37014 Flattening Rolls (Knurled Face) - set [VIDEO]
#37018 Tap In Rolls (for Starting Collars) - set [VIDEO]
#37021 Saddle Tap Rolls - set [VIDEO]
#37024 Combination Bead & Crimp Rolls Light Gauge (20 ga and lighter)—includes 37006 Bead Rolls - set [VIDEO]
Note: Crimping Only rolls do not mate with the 3/8” Single Bead rolls that are standard with machine
#37019 Elbow Edge Rolls Item Code: EM-37019
For the Elbow Edging profile, often used as a Gorelocker to attach round segments to one another, the male is made by orienting the workpiece in between the top and bottom rolls; the female is made by orienting it over the top roll. [VIDEO #1] [VIDEO #2]
What are the 1/2″ Offset Rolls?
Sometimes a shop welds or spotwelds the Gores together instead of using a Gorelocker and connecting with the standing seam. It’s typically in 18 ga and heavier; One end of the gore (segment) is flared out and the other end slips into the flared end and either spotwelded or welded. Example is the welded Elbow in photo below: the ends are offset and then the elbow is assembled/welded.
$9,995.00
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Empire Machinery Phase 1PH Voltage 110V Manufacturer Empire Machinery Type Electric We offer three models of this Power Rotary machine: the Hand Crank, Air Cylinder and Hydraulic Cylinder. It’s worth noting that all three models include the Hand Crank. This base model is easily the top seller followed by the Air Cylinder Model which speeds up beading (or crimping) operations on spiral fittings. The Hydraulic Cylinder model is recommended for shops using exclusively for Vanstone flanges.
While the flanging rolls require a controlled step down of the upper shaft which only the Hand Crank or the Hydraulic Cylinder machines can offer, a simple solution for shops that like the speed afforded by the air cylinder but want to do some flanging is to take the cylinder off when needed. It takes about two minutes to get the cylinder off and put the hand crank on.
All machines come with a foot pedal, but the manual machines (#36001) you can choose to have either the variable speed or forward/reverse pedal. The standard foot pedal still has speed control on the dial, the variable changes speed based on how far the pedal is pushed down.
EMT-7R (Base Machine) #36001 110 volt Single Phase [VIDEO]
Retrofit Options for existing machines (pick one) Note each of the Listed Options is an addition to the base machine itself. Manual hand crank is standard with all models:
#1: Air Cylinder with Variable Speed Forward/Reverse Foot Pedal (ideal for shops that make Spiral Pipe fittings): Part #39003
#2: Hydraulic Cylinder with Forward/Reverse Foot Pedal And Hand held Pendant (ideal for forming Vanstone Flanges): Part #39005 when bought as retrofit from air cylinder Part #39005-NP when bought as retrofit from manual
Roll Options:
#37000 3/8” Single Bead Rolls (note : Included with the purchase of a new EMT-7R) - set
#37003 1/2” Single Bead Rolls - set
#37005 1/4” Ogee Bead Rolls ( this is a Double Bead, one up and own down) - set [VIDEO]
#37007 Crimping Rolls Heavy Gauge (16GA/18GA) (1-3/4″ Wide Crimp) - set [VIDEO]
#37008 Crimping Rolls Light Gauge (20GA & Lighter) (1-3/4″ Wide Crimp) - set [VIDEO]
#37009 1/4″ 90 Degree Flanging Rolls (Pipe Stays in Horizontal Position) - set
#37010 1/2″ 90 Degree Flanging Rolls (Max. Capacity 16 GA Stainless), (Pipe Stays in Horizontal Position) - set [VIDEO]
#37011 1/2″ Offset Rolls - set [VIDEO]
#37013 Flattening Rolls (Smooth Face) - set [VIDEO]
#37014 Flattening Rolls (Knurled Face) - set [VIDEO]
#37018 Tap In Rolls (for Starting Collars) - set [VIDEO]
#37021 Saddle Tap Rolls - set [VIDEO]
#37024 Combination Bead & Crimp Rolls Light Gauge (20 ga and lighter)—includes 37006 Bead Rolls - set [VIDEO]
Note: Crimping Only rolls do not mate with the 3/8” Single Bead rolls that are standard with machine
#37019 Elbow Edge Rolls Item Code: EM-37019
For the Elbow Edging profile, often used as a Gorelocker to attach round segments to one another, the male is made by orienting the workpiece in between the top and bottom rolls; the female is made by orienting it over the top roll. [VIDEO #1] [VIDEO #2]
What are the 1/2″ Offset Rolls?
Sometimes a shop welds or spotwelds the Gores together instead of using a Gorelocker and connecting with the standing seam. It’s typically in 18 ga and heavier; One end of the gore (segment) is flared out and the other end slips into the flared end and either spotwelded or welded. Example is the welded Elbow in photo below: the ends are offset and then the elbow is assembled/welded.