Everett Straight Cut 10” Saw 3HP/220V/1PH
Brand Everett Manufacturer Everett Industries Shipping Weight 77 lbs Horsepower 3 HP Phase 3 PH Voltage 230/460v For many daily tasks in a sheet metal shop a Circular Saw performs faster than a Horizontal bandsaw. It’s ideal to cut everything from 2″ and 4″ Turning Vane to Ductmate Flange. It will even cut Galvanized 2″ x 2″ x 1/4″ Angle or Strut, materials that are more suited for a Horizontal Bandsaw.
Conklin stocks the American made Everette 10″ Abrasive Circular Saw as a 3 HP 220 Volt Single Phase Model. Unlike other Abrasive Chop Saws with a thin blade and small 1/3 HP motor, the Everette Saw is a Commercial Grade with a thick Fiber Mesh blade and larger 3 HP motor and it runs at 3650 RPM, much faster than an ordinary chop saw.
Everette makes two types of these dry cut** Circular saws. One is a 90-degree saw that just comes up and down and one other is a miter saw which will cut either side up to a 45-degree angle. Everett saws run a 3650 RPM, much faster than the little chop saws.
*Saw and Blades sold separately
**Dry abrasive means that it has grit on the cutting wheel. You can cut multiple pieces at a time. For example, 3 pieces of 2” x 2” x ¼” angle.
Wheel Capacity: 10″ wheel
Arbor Shaft: 5/8″ arbor
Drive: Dual
Raw edge sure grip “V” belts with steel sheaves.
Capacity: 1″ solid 1 1/2″ solid, 2″ pipe, 10″ miter saw only most 1 3/4″ shapes @ 45°
Motor: 3 H.P. special hi-torque motor. Totally-enclosed, fan-cooled. Single phase 115/230 volt or 3 phase 230/460 volt. Others available.
Spindle Bearings: Precision sealed ball bearings. Lubricated for life.
Safety Guards: Cut-off wheel and guards exceed safety code requirements. Improved spark arrestors to deflect sparks.
Stop: Adjustable down stop limits depth of chop stroke.
Voltage Codes:
0 = 115/1/60
1 = 230/1/60
2 = 208/3/60
3 = 230/3/60
4 = 380/3/50
5 = 460/3/60
7 = 575/3/60
$1,295.00
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Everett Manufacturer Everett Industries Shipping Weight 77 lbs Horsepower 3 HP Phase 3 PH Voltage 230/460v For many daily tasks in a sheet metal shop a Circular Saw performs faster than a Horizontal bandsaw. It’s ideal to cut everything from 2″ and 4″ Turning Vane to Ductmate Flange. It will even cut Galvanized 2″ x 2″ x 1/4″ Angle or Strut, materials that are more suited for a Horizontal Bandsaw.
Conklin stocks the American made Everette 10″ Abrasive Circular Saw as a 3 HP 220 Volt Single Phase Model. Unlike other Abrasive Chop Saws with a thin blade and small 1/3 HP motor, the Everette Saw is a Commercial Grade with a thick Fiber Mesh blade and larger 3 HP motor and it runs at 3650 RPM, much faster than an ordinary chop saw.
Everette makes two types of these dry cut** Circular saws. One is a 90-degree saw that just comes up and down and one other is a miter saw which will cut either side up to a 45-degree angle. Everett saws run a 3650 RPM, much faster than the little chop saws.
*Saw and Blades sold separately
**Dry abrasive means that it has grit on the cutting wheel. You can cut multiple pieces at a time. For example, 3 pieces of 2” x 2” x ¼” angle.
Wheel Capacity: 10″ wheel
Arbor Shaft: 5/8″ arbor
Drive: Dual
Raw edge sure grip “V” belts with steel sheaves.
Capacity: 1″ solid 1 1/2″ solid, 2″ pipe, 10″ miter saw only most 1 3/4″ shapes @ 45°
Motor: 3 H.P. special hi-torque motor. Totally-enclosed, fan-cooled. Single phase 115/230 volt or 3 phase 230/460 volt. Others available.
Spindle Bearings: Precision sealed ball bearings. Lubricated for life.
Safety Guards: Cut-off wheel and guards exceed safety code requirements. Improved spark arrestors to deflect sparks.
Stop: Adjustable down stop limits depth of chop stroke.
Voltage Codes:
0 = 115/1/60
1 = 230/1/60
2 = 208/3/60
3 = 230/3/60
4 = 380/3/50
5 = 460/3/60
7 = 575/3/60