Norlok SL3 25 Clinching Machine
Norlok SL3 25 Clinching Machine
Brand Norlok Manufacturer Norlok Technology, Inc. Speed 60-80 cycles / minute (standard) / up to 150 cycles per minute with options Weight 1,000 lbs Capacity 14-30 Ga Phase 1PH (only for when optional laser light is used) Voltage 110V (only for when optional laser light is used) SL stands for “Sure Lok” and that’s what this Clinching machine makes: a permanent clinch lock of two pieces of metal.
For a Duct Fab shop, the uses are numerous—Square to Rounds, Various Fittings, Flexible Duct Connectors and Drain Pans.
The SLIII is Norlok's premium model, built to last a lifetime and running off of an Advanced Power Unit that requires 1/3 of the amount of air than the SLII or other brands of Clinching Machines. While this energy efficiency is what separates it from other Clinching machines it's also the model we recommend for a shop with a small air compressor or in a shop already full of pneumatic machines fighting for the shop air.
It’s C Frame has 12″ Opening in the C and a 2-1/2″ distance between the Punch and Die in the Open Position which is covers at 60-80 clinches per minute. By reducing the stroke (tooling open height) from 2-1/2″ to 1″ the clinches per minute can be increased to 120.
3 Dies are included, each with a rating of 250,000 clinches at the min and 1,000,000 clinches max. Also included is a Laser Light for easy marking.
Optional:
Offered as an option is the Quick Change Out Rectangular Stainless Tooling Kit. Stainless is a very hard metal and with round tooling it’s a challenge to generate enough power to coin the material at the bottom of the pocket and form a clinch. The Stainless Tooling kit will therefore avoid the need to take the workpiece over to the Spotwelder.
110 single phase volt standard, but only for when optional laser light is used (otherwise no need to plug it in at all). The foot pedal is pneumatic.
Comes with reverse tooling ability—operator can leave the die in the bottom and the punch in the top or put the die in the top and the punch in the bottom
Rectangular Tooling Kit for Stainless: $670.00 USD (includes Short style Punch, Die, Punch stripper and Die Collar) — NOTE: SOLD SEPARATELY
Item Code: NL008098 Norlok Surelok III Rectangle Tool Kit for Stainless (includes die, punch, punch stripper, die collar) #008098
$22,790.00
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Norlok Manufacturer Norlok Technology, Inc. Speed 60-80 cycles / minute (standard) / up to 150 cycles per minute with options Weight 1,000 lbs Capacity 14-30 Ga Phase 1PH (only for when optional laser light is used) Voltage 110V (only for when optional laser light is used) SL stands for “Sure Lok” and that’s what this Clinching machine makes: a permanent clinch lock of two pieces of metal.
For a Duct Fab shop, the uses are numerous—Square to Rounds, Various Fittings, Flexible Duct Connectors and Drain Pans.
The SLIII is Norlok's premium model, built to last a lifetime and running off of an Advanced Power Unit that requires 1/3 of the amount of air than the SLII or other brands of Clinching Machines. While this energy efficiency is what separates it from other Clinching machines it's also the model we recommend for a shop with a small air compressor or in a shop already full of pneumatic machines fighting for the shop air.
It’s C Frame has 12″ Opening in the C and a 2-1/2″ distance between the Punch and Die in the Open Position which is covers at 60-80 clinches per minute. By reducing the stroke (tooling open height) from 2-1/2″ to 1″ the clinches per minute can be increased to 120.
3 Dies are included, each with a rating of 250,000 clinches at the min and 1,000,000 clinches max. Also included is a Laser Light for easy marking.
Optional:
Offered as an option is the Quick Change Out Rectangular Stainless Tooling Kit. Stainless is a very hard metal and with round tooling it’s a challenge to generate enough power to coin the material at the bottom of the pocket and form a clinch. The Stainless Tooling kit will therefore avoid the need to take the workpiece over to the Spotwelder.
110 single phase volt standard, but only for when optional laser light is used (otherwise no need to plug it in at all). The foot pedal is pneumatic.
Comes with reverse tooling ability—operator can leave the die in the bottom and the punch in the top or put the die in the top and the punch in the bottom
Rectangular Tooling Kit for Stainless: $670.00 USD (includes Short style Punch, Die, Punch stripper and Die Collar) — NOTE: SOLD SEPARATELY
Item Code: NL008098 Norlok Surelok III Rectangle Tool Kit for Stainless (includes die, punch, punch stripper, die collar) #008098