Tennsmith HB97-16 Heavy Duty Straight Bending Brake
Brand Tennsmith® Capacity 16 Ga Length 140 in Size 8 ft Weight 3,250 lbs Alternate Part Number 85120 Height 60 in Manufacturer Tennsmith Type Straight Width 52 in
With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches.
Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thickness or radii.
Removable apron angle and insert permit 1/4-inch reverse bends in lighter material.
Bored in line to ensure perfect alignment, the pivot points are fitted with oil-impregnated bearings. The hinge pins are high-tensile, alloy steel.
Ductile steel clamp handles, heavy yokes, grease fittings, and an apron stop rod complement the many other fine features of these heavy-duty brakes.
- Leveling screws and lock nuts on the pedestals
- Jack screws and tensioner bolts on the apron
- Truss rods on the apron, base, and upper beam
- Fully adjustable counterbalances to facilitate the bending process
- Replaceable nose bar and apron inserts
Bending Length: 73 in.
Maximum Lift Of Beam: 1-7/8 in.
Front To Rear Beam Adjustment: 1/2 in.
Minimum Reverse Bend: 1/4 in.
Minimum Flange In Capacity Material: 1 in.
$6,650.00
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Tennsmith® Capacity 16 Ga Length 140 in Size 8 ft Weight 3,250 lbs Alternate Part Number 85120 Height 60 in Manufacturer Tennsmith Type Straight Width 52 in
With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches.
Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thickness or radii.
Removable apron angle and insert permit 1/4-inch reverse bends in lighter material.
Bored in line to ensure perfect alignment, the pivot points are fitted with oil-impregnated bearings. The hinge pins are high-tensile, alloy steel.
Ductile steel clamp handles, heavy yokes, grease fittings, and an apron stop rod complement the many other fine features of these heavy-duty brakes.
- Leveling screws and lock nuts on the pedestals
- Jack screws and tensioner bolts on the apron
- Truss rods on the apron, base, and upper beam
- Fully adjustable counterbalances to facilitate the bending process
- Replaceable nose bar and apron inserts
Bending Length: 73 in.
Maximum Lift Of Beam: 1-7/8 in.
Front To Rear Beam Adjustment: 1/2 in.
Minimum Reverse Bend: 1/4 in.
Minimum Flange In Capacity Material: 1 in.