Spiral Helix Tubeformer 1602/3600
Spiral Helix Tubeformer 1602/3600
Brand Spiral-Helix, Inc. Manufacturer Spiral-Helix, Inc. Voltage 440V Capacity 20 Ga Phase 3PH Spiral Helix’s builds their Model 3600 Tubeformer in a modular design which means it’s expandable / upgradeable to increased speed or gauge capacity by changing out the gear box and motor thereby switching the Drive Systems to the Pro Drive (for speed) or the Heavy Gauge Drive (for capacity). Speed and strength are derived from the size and number of “teeth” on the gears. This modular system design means that if a fab shop’s need changes in the future, the shop can change the drive to match the capacity needs, rather than replacing the entire machine. For shops that are “first time Spiral Duct machine users”, the Standard Drive is the choice nearly 100% of the time.
The base machine comes standard in 20 Gauge capacity with forming heads of 4″ – 30″ diameters, even sizes, but can be quoted however the customer prefers. Forming heads for diameters other than the ones included are in stock at the factory and installed easily in the shop. Forming Heads available for 3″ thru 64″ Diameter pipe. Base machine upgradable to 18 Gauge Mild Steel capacity with the Heavy Gauge Drive.
Note: TF3600 comes standard with a Vertical Decoiler. Horizontal Decoiler is available but not common. It holds 3 coils and has a max weight of 6,000 lbs total but the coils are stacked on top of each other with the machine pulling from the top coil. Therefore multi gauge production is not feasible
Electrical Requirements: 440V / 3 Phase — shops with 220/230V will require step up transformer
Amps Required: 50
Forming heads for the Spiral Pipe Machine - the standard machine quote includes 4" thru 26" (even sizes only)
FAQ
Q: Can the spiral unload from either side?
A: Changing the discharge of the tubes onto the ramps can be changed very easy, see attached page from the operations manual.
Call For Pricing
Request a quote for more detailed pricing including freight and taxes.
Brand Spiral-Helix, Inc. Manufacturer Spiral-Helix, Inc. Voltage 440V Capacity 20 Ga Phase 3PH Spiral Helix’s builds their Model 3600 Tubeformer in a modular design which means it’s expandable / upgradeable to increased speed or gauge capacity by changing out the gear box and motor thereby switching the Drive Systems to the Pro Drive (for speed) or the Heavy Gauge Drive (for capacity). Speed and strength are derived from the size and number of “teeth” on the gears. This modular system design means that if a fab shop’s need changes in the future, the shop can change the drive to match the capacity needs, rather than replacing the entire machine. For shops that are “first time Spiral Duct machine users”, the Standard Drive is the choice nearly 100% of the time.
The base machine comes standard in 20 Gauge capacity with forming heads of 4″ – 30″ diameters, even sizes, but can be quoted however the customer prefers. Forming heads for diameters other than the ones included are in stock at the factory and installed easily in the shop. Forming Heads available for 3″ thru 64″ Diameter pipe. Base machine upgradable to 18 Gauge Mild Steel capacity with the Heavy Gauge Drive.
Note: TF3600 comes standard with a Vertical Decoiler. Horizontal Decoiler is available but not common. It holds 3 coils and has a max weight of 6,000 lbs total but the coils are stacked on top of each other with the machine pulling from the top coil. Therefore multi gauge production is not feasible
Electrical Requirements: 440V / 3 Phase — shops with 220/230V will require step up transformer
Amps Required: 50
Forming heads for the Spiral Pipe Machine - the standard machine quote includes 4" thru 26" (even sizes only)
FAQ
Q: Can the spiral unload from either side?
A: Changing the discharge of the tubes onto the ramps can be changed very easy, see attached page from the operations manual.