Flagler DF2 Duct Flange Machine - 14 station machine
Flagler DF2 Duct Flange Machine - 14 station machine
Brand Flagler Dimensions 130" L x 32" W x 40" H Manufacturer The Flagler Corp Shipping Weight 3,500 lbs Voltage 230V Capacity 18 ga Horsepower 7-1/2 HP Phase 3PH Speed 60 FPM (optional up to 100 FPM) 1-1/2" diameter shafts with the DF rolls mounted on the left side standard. Center tooling can be added at the factory and or auxiliary tooling on the opposite side. Each machine comes standard with a short parts feeder. The feeder rail can be raised or lowered for proper part alignment with the tooling.
- 14 Stations
- 1-1 /2" dia. (at bearing) hardened and ground spindles Hardened feed gauge
- Rise/Fall short parts feeder
- Motor: 230/460/3/60/1800 RPM
- Lubrication points at all bearings
- Extended shafts for auxiliary tooling
- Dual head version also available
Optional Tooling including but not limited to:
Clip Rolls (20-26 Ga. )
1-½” Standing Seam Rolls (16-20 gauge)
1-¼” Standing Seam Rolls (18-22 gauge)
1-1/8” Tap-In (3 in 1) (18-22 gauge)
1/2” Female Pittsburgh Rolls (16-22 gauge)
3/8” Female Pittsburgh Rolls (18-24 gauge)
5/16” Pittsburgh Rolls (20-26 gauge)
Options Listed Below must be Factory Installed:
1” Standing “S” Cleat, Rolls inboard (22-28 gauge)
2” x 2” Angle, inboard (16-20 gauge)
Variable Drive (0-100 fpm)
Short Parts Feeder for Aux Rolls
Call For Pricing
Request a quote for more detailed pricing including freight and taxes.
Brand Flagler Dimensions 130" L x 32" W x 40" H Manufacturer The Flagler Corp Shipping Weight 3,500 lbs Voltage 230V Capacity 18 ga Horsepower 7-1/2 HP Phase 3PH Speed 60 FPM (optional up to 100 FPM) 1-1/2" diameter shafts with the DF rolls mounted on the left side standard. Center tooling can be added at the factory and or auxiliary tooling on the opposite side. Each machine comes standard with a short parts feeder. The feeder rail can be raised or lowered for proper part alignment with the tooling.
- 14 Stations
- 1-1 /2" dia. (at bearing) hardened and ground spindles Hardened feed gauge
- Rise/Fall short parts feeder
- Motor: 230/460/3/60/1800 RPM
- Lubrication points at all bearings
- Extended shafts for auxiliary tooling
- Dual head version also available
Optional Tooling including but not limited to:
Clip Rolls (20-26 Ga. )
1-½” Standing Seam Rolls (16-20 gauge)
1-¼” Standing Seam Rolls (18-22 gauge)
1-1/8” Tap-In (3 in 1) (18-22 gauge)
1/2” Female Pittsburgh Rolls (16-22 gauge)
3/8” Female Pittsburgh Rolls (18-24 gauge)
5/16” Pittsburgh Rolls (20-26 gauge)
Options Listed Below must be Factory Installed:
1” Standing “S” Cleat, Rolls inboard (22-28 gauge)
2” x 2” Angle, inboard (16-20 gauge)
Variable Drive (0-100 fpm)
Short Parts Feeder for Aux Rolls