Tennsmith Single Wheel Slitter 16 Ga
Brand Tennsmith® Capacity 16 Ga Manufacturer Tennsmith Amperage Draw 6 AMPS Horsepower 1/3 HP Voltage 110V The Tennsmith SLE24-16 Single Blade Power Slitter allows a shop to take a 48″ wide sheet and split it in half, or into any increment less than 24″, all the way down to 1″ wide strip.
Long popular with smaller HVAC duct shops to make strips of 2.125″ for Drive Cleat and 3.65″ for Flat S Lock but also among Roofers for making drip edge, gravel stop, and facia work without the need for a 10 foot shear.
Simple to operate: set the pointer to the desired cut width, lock in place and cut. Capacity of 16 ga Galvanized. Stand is optional.
- Die-set type gauge mounting for easy setting and precise squareness
- Gauge mounting rods are extended to provide convenient carrying handles
- Gauge is easily removed for easy transportation and no “re-squaring” needed
- Knives are “reversible”, intervals between sharpening is double that of a single edge knives
- Outbound knives for easy access
- Stripper rings are designed to hold the material flat, and to prevent marking on the material
- Drive shafts mounted with precision sealed ball bearings
- Dual bearings mounted at knife height end to minimize deflection and increase knife life
- Heavy duty roller chain drive powered by 1/3 HP gear motor
- Optional stand
- 1 set of HCHC Blades included with machine
$4,500.00
/ EARequest a quote for more detailed pricing including freight and taxes.
Brand Tennsmith® Capacity 16 Ga Manufacturer Tennsmith Amperage Draw 6 AMPS Horsepower 1/3 HP Voltage 110V The Tennsmith SLE24-16 Single Blade Power Slitter allows a shop to take a 48″ wide sheet and split it in half, or into any increment less than 24″, all the way down to 1″ wide strip.
Long popular with smaller HVAC duct shops to make strips of 2.125″ for Drive Cleat and 3.65″ for Flat S Lock but also among Roofers for making drip edge, gravel stop, and facia work without the need for a 10 foot shear.
Simple to operate: set the pointer to the desired cut width, lock in place and cut. Capacity of 16 ga Galvanized. Stand is optional.
- Die-set type gauge mounting for easy setting and precise squareness
- Gauge mounting rods are extended to provide convenient carrying handles
- Gauge is easily removed for easy transportation and no “re-squaring” needed
- Knives are “reversible”, intervals between sharpening is double that of a single edge knives
- Outbound knives for easy access
- Stripper rings are designed to hold the material flat, and to prevent marking on the material
- Drive shafts mounted with precision sealed ball bearings
- Dual bearings mounted at knife height end to minimize deflection and increase knife life
- Heavy duty roller chain drive powered by 1/3 HP gear motor
- Optional stand
- 1 set of HCHC Blades included with machine