Home
Home
Home
Sheet Metal, Duct Fab & HVAC Supplies—Founded in 1874Branch Locator
{0} items in cart
Contact Us
PayNOW
loading content

Condu Locks

Harry Thompson IVMarch 11th, 2019

Dyn-O-Loc

Condu Lock—Duct Reinforcement

Condu Locks are visible on the cheek of this Radius Elbow. The Conduit is inserted through a hole in the duct wall and secured with a Condu Lock.

Tie Rods can be used to support duct sizes over 48” or smaller duct in high pressure applications. Dyn-O-Locs insert into the ends of the hollow tie rods to provide a means of attaching the conduit to the duct.

  • Available for use with 1/2" or 3/4" Conduit.
  • Properly installed Dyn-O-Loc is pull tested to withstand over 1900 lbs.
  • Large self-sealing washer preinstalled on the bolt.
  • Long bolt for easier installation.
  • Bolt length: 1-1/2" total or 1-3/8" under the head.