Home
Home
Home
Sheet Metal, Duct Fab & HVAC Supplies—Founded in 1874Branch Locator
{0} items in cart
Contact Us
PayNOW
loading content

Square to Round Machine

Harry Thompson IVDecember 4th, 2018

Namcor Striker HDX

How do you bend metal?

Larger square to round transitions such as this require many separate bends to produce.

Bending a flat piece of metal so that the square cones into a round shape is usually done on a 10 ft hand brake—that's a lot of effort!

Tennsmith Hand Brake
Save some effort and speed up production by Taking a Break from the Brake!
Namcor Striker HDX
Square to Round Transition

Safely fabricate quality-leading offset and center-line square-to-rounds with ease, efficiency, and ergonomically.

If you’re looking for a prospective shop on the Namcor machine, look for these signs: two cheeks formed in this rounded way and a cheek that has lot’s of small bends that allow it to look like it’s increasing in diameter from top to bottom.
Square to round transitions are often very large.

Note: Some Namcor Striker videos show a non skid rubber mat or rubber footings. These do not come with the machine and are not offered as an option. Some shops have found that a 4 ft x 6 ft x 3/4” thick rubber mat works well in keeping the machine from moving during fabrication.