Power Hand Shears

Conklin stocks three types of power hand shears—unishears (S series), double cut shears (C series), and nibblers (N series).  In addition, the nibbler has a variation in the cutting head that with a quick changeout can convert the round head of the standard nibbler to a square head to become a profile nibbler (PN).

• Turns quickly = S series
• Best at following a marked line = S series
• Cuts best circles = N series
• Cuts at a right angle = PN series
• Can cut upside down = S series
• Cuts spiral pipe Lockseam = C and PN series
• Easiest to use = N and C series
• Punches while it cuts = N and PN series
• Most difficult to use = S series
• Most versatile (bc you can change out the head) = N and PN series
• Leaves one of the two pieces deformed = S series
• No material loss = S series
• No waste strip or chips = S series
• Touch-ups in field during install = N series
• Clearest view of cutting line = S series
• Leaves two pieces with no deformation = C series
• Stainless blades optional and easy to add = C and S series
• Distortion-free cutting = N, PN, and C series
• Best at interior cutouts = PN and N series
• Best at cutting exterior of Double Wall Spiral = C series
• Best to use in place of a 52" stomp shear = C series
• Best at interior cutouts that have a spiral seam = PN series
• Best to use in a clean room = S and C series
• Most powerful for its size = N and PN series
• Best tool for cutting around a Rectangular Duct = PN series
• Tool that accommodates a 7" stem with blade for extra-deep cut = PN series
• Leaves chip waste = N and PN series (note: all chips fall under the cut, never above the cutting area)