Stainless Steel band with clamp that secures Flex Duct or rigid round duct connections. The band is secured in place at the bridge by a slotted hex head screw. This zinc plated carbon steel screw can be flipped up away from the band to offer a quick release when adjustments are needed. Dyna-Clamps are available in stock sizes ranging from a 7’’ diameter to 20’’. Two or more clamps can also be connected together to accommodate duct diameters over 20’’.
Usually in engineer’s detail drawing, specs, or mechanical note: All flex duct connections to be made with stainless steel banding/clamps.
Sizing based on max diameter that the stainless band can accommodate. Each size draws down 2-1/2″ in diameter.
Item Codes:
DDDT07WD DT7WD 7″ Stainless Dyna Clamp #7012 100/Box
DDDT08WD DT8WD 8 ” Stainless Dyna Clamp #7007 100/Box
DDDT10WD DT10WD 10″ Stainless Dyna Clamps #7008 100/Box
DDDT12WD DT12WD 12″ Stainless Dyna Clamp #7009 100/Box
DDDT15WD DT15WD 15″ Stainless Dyna Clamp #7010 100/Box
DDDT16WD DT16WD 16″ Stainless Dyna Clamp #7011 100/Box
DDDT20WD “DT20WD 20″” Stainless Dyna Clamp #7044 (100/box)”
